Table of Contents
Advertisement
IMPORTANT: When the washing machine is positioned in the location
where it will be used. Mak
th
e floor, by pressing down on each corner and checking that the
a
ppliance stands still.
Connecting to the mains water supply
IMPORTANT: The washing machine shou
w
ater mains using an existing inlet hose, YOU MUST utilise the inlet
hose that is provided with the appliance.
Your appliance should only be connected to a cold water supply.
2
th
3
) Screw the tap tightly in the direction of the screw
th
IMPORTANT: When connecting the screw
hose and the inlet valve, prevent the screw thread from b
s
ecured incorrectly or it will wear or leak.
Do not over b
end the inlet hose or this will cause damage.
e sure that all four feet are resting firmly on
1
) Take out the attached inlet hose.
) Attach the inlet hose vertically to the spiral tap for
e washing machine.
read of the inlet hose.
4
) Connect the hose to the water inlet at the back of
th
e washing machine.
ld never be connected to the
thread of the inlet
eing
36
Advertisement
Table of Contents
