Baumatic BWMI1216 Instruction Manual page 10

LED display
o The LED display will show how much time a wash cycle has until it
completes. If the delay start button has been pressed, then the LED
display will show the remaining time until the wash cycle will
commence.
o The display will also show temperature setting value, spin speed
value, child lock state, door lock state, wash progress, and alarm
messages.
Temperature selection button
o Press this button to select the temperature that you require for a
particular wash programme. This will be displayed in the LED
display. ("--"(cold), 15°C, 20°C, 30°C, 40°C, 50°C, 60°C, 90°C)
Spin speed selection button
o Press this button to select the spin speed that you require for a
particular wash programme. This will be displayed in the LED
display.
Delay wash button
o Press this button to delay the wash programme for a maximum of
24 hours. Each press will increase the delay time by 30 minutes.
This will be displayed in the LED display.
Rinse hold button
o Press this button to select the rinse hold wash programme option.
o When the wash cycle reaches the final rinse, instead of draining the
water, it will suspend the clothing in water. This option allows you
to drain and spin the wash load at a later time, and will help to
prevent the clothes from creasing. Press start to resume the cycle.
Extra rinse option button
o Pressing this button will mean the appliance will perform an
additional rinse at the end of the wash cycle.
o Press once for one additional rinse - "P-1" will show in the display.
Press twice for two additional rinses - "P-2" will show in the display.
Press three times for three additional rinses - "P-3" will show in the
display.
Intense wash button
o Press this button to select the "intense" wash programme option.
o The appliance will then increase the washing time of the main wash.
10