Connecting To The Mains Water Supply - Baumatic BWM1417W Instruction Manual

Connecting to the mains water supply

IMPORTANT: The washing machine should never be connected to the
water mains using an existing inlet hose, YOU MUST utilise the inlet
hose that is provided with the appliance.
Your appliance should only be connected to a cold water supply.
o Take out the supplied inlet hose.
o Fix one end of the inlet hose vertically to the
spiral tap which has been assigned to the
appliance.
o Screw the inlet hose tightly onto the tap in the
direction of the screw thread, taking care not
to wear it down. If secured incorrectly, the
thread will wear or leak.
o Connect the hose to the water
inlet at the back of the washing
machine. Make sure the inlet
hose is not over-bent as this can
damage the hose.
29