Cancelling a wash programme
Press the Start/pause button whilst a wash programme is in
progress and the appliance will go into pause status.
o Turn the wash programme selection knob until it is at the 'off'
position.
Before opening the porthole door, you MUST drain the
appliance; otherwise there may still be water in the
drum when you open the door.
Turn the wash programme selection knob to the spin programme
then press the Start/pause button.
o The appliance will then drain the water that is left in the drum and
spin the clothes.
o The washing machine will stop automatically when it has completed
a wash cycle.
o At the end of the drain programme, the door will remain locked for
2 – 3 minutes before it is possible to open the door and take out
the garments.
Spin speed selection button
o If you press the speed selection button, then the spin speed will be
displayed and each press will scroll through the speed options for
that particular wash programme.
Temperature selection button
o If you press the temperature selection button the wash temperature
will be displayed. By pressing the temperature button you can scroll
through the temperature options for the chosen wash programme.
19