Table of Contents
Advertisement
Wash programme guidance
o The default setting column shows the wash temperature and spin
speed that the appliance will automatically select for a particular
wash programme. It is possible to override these settings, using the
spin speed selection button and temperature selection button.
o IMPORTANT: You should make sure that the spin speed and
temperature that you select are appropriate for the garments that
you are washing.
o The wash cycle times that are quoted and shown by the LED
display, are intended as a guide only. Please note that factors
external to the machine, e.g. the temperature of your water supply,
your water pressure etc., can affect the time it takes for the wash
cycle to complete.
o If you select the rinse hold option, the machine will not spin the
clothing at the end of a wash cycle. If you pick this option, then the
machine will stop with water inside of the drum.
o Important: Before opening the door of the appliance, you MUST
press the start/pause button to resume the wash cycle which will
drain the remaining water.
Selecting a wash programme
Load
your
laundry
compartment(s) of the soap drawer.
Close the porthole door firmly.
Select the most appropriate wash programme for the garments that
you are washing, by turning the programme selector knob.
o The washing machine will automatically select a spin speed and
wash temperature for the wash programme that you have chosen.
If you press the spin selection button you can adjust the spin
speed. The LED display will show the spin speed that you have
chosen.
If you press the temperature selection button you can adjust the
wash temperature. The LED display will show the wash temperature
that you have chosen.
and
put
detergent
in
the
relevant
17
Advertisement
Table of Contents
