Table of Contents
Advertisement
Rinse Hold option button
o If you press the Rinse Hold option button, the indicator neon above
it will light.
o When the wash cycle reaches the final rinse, instead of draining the
water away, it will suspend the wash load in water.
o When you want to spin the wash load, press the Rinse Hold option
button again. The indicator neon will go out and the spin stage of
the wash cycle will take place.
Extra rinse option button
o If you press the extra rinse option button, the indicator neon above
it will light.
o If you select this option, an additional rinse will be performed for
the selected wash programme.
Delay wash programme
o If you press the delay start button you can programme the wash
cycle to commence at a period of time in the future.
o You should select your wash programme as normal, but instead of
pressing the Start/pause button to get the wash cycle to
commence. You should press the delay start button.
o Each time the delay start button is pressed, the length of time will
increase by 30 minutes.
o It is possible to delay the start of the wash cycle by a maximum of
24 hours.
NOTE: the displayed delay time is THE END time of the washing
programme, therefore the delay time MUST be longer than the
programmes running time. For example, "06:00" means the
wash programme will end in 6 hours. If the wash cycle is 01:30
hours, then the actual delay time will be 4 hours and 30
minutes.
o Press the Start/pause button and the countdown time will
commence. The LED display will countdown the remaining time until
the wash cycle commences.
o Once the delay start time has been reached, the wash programme
that you have previously selected will start. The LED display will
then countdown the remaining time of the wash cycle that is in
progress.
20
Advertisement
Table of Contents
