Key Assignment And Special Characters - QuickLabel Systems pronto! 486 User Manual

In the offline menu and for entry of variable data:
Key
←
→
↑
↓
[Enter]
[Esc]

Key assignment and special characters

The printer features a specific keyboard assignment table for each setting of
the Country configuration parameter. These tables generally match the DOS
keyboard assignments (see Interfaces on page 5-8).
The [Alt Gr] key has no function. All special characters obtained using this
key (e.g. [ ] { } \) and various other special characters (e.g. " × ÷) can be
obtained using the [Alt] key. Additional special characters can be output
using a sequence of two characters, whereby you must press the [Alt] key
when entering the second character.
Some special characters cannot be shown in the display of the printer. In this
case, they are replaced by a character similar to the special character.
Note: When using a scanner ensure that the same character set is set for both
the scanner and the printer.
Pronto! 482/486/682/863
Function
Moves cursor left. On the top level of the offline menu,
switches back to Ready mode.
Moves cursor right.
Increases the value at the cursor position.
Decreases the value at the cursor position.
Confirms the input.
Cancels input and returns.
8-3