Selection Of The Rewind Method - QuickLabel Systems pronto! 486 User Manual

3 Insert the pin (10) of the rewinder into the hole (12) of the printer. Press
the rewinder against the printer. That way the plug (9) of the rewinder
will be connected to the peripheral port (13) of the printer.
4 Secure the rewinder by tightening the spindle (8).

Selection of the Rewind Method

It is possible to rewind inside and outside wound labels with the rewinder.
But before rewinding the method has to be set.
Caution: To avoid damage, do not change the rewinding direction, when the
rewind axle is turning!
Set the switch (11) to the required manner of rewinding:
Pronto! 482/486/682/863
Rewinding with labels inside
Rewinding with labels outside
8-9