Remedies For Misoperations - Panasonic SD-P104 Operating Instructions Manual

Remedies for misoperations

Pressed "Start" before
adding any ingredients.
Pressed "Start" when the
wrong menu, raisin and
crust color are selected!
Install the wrong blade
and start the unit!
Pull out the power plug!
Pressed "Stop"
erroneously during
operations!
■ Failed dough can be used again to make doughnut and pizza. (P.36, 37, 47)
52
Ingredients can be added at the following time.
However, the bread making process may fail if the ingredients are not fully
mixed in the initial "kneading" procedure.
Forgotten ingredients
Feed into the bread pan before adding the instant dry yeast.
"Dough" functions
Pizza dough ................................................................ within 1 min
Bread dough ............................................................ within 10 min
Butter
Granulated sugar
"Bread" functions
Rice flour .................................................................... within 35 min
milk powder
Other menu .............................................................. within 20 min
Salt
*
Open the lid to the minimum angle to avoid spill of instant dry
yeasts.
Add into the yeast dispenser before the instant dry yeast is dispensed.
"Dough" functions
Pizza dough ................................................................ within 1 min
Bread dough ............................................................ within 10 min
Instant dry yeast
"Bread" functions
Rice flour .................................................................... within 35 min
Other menu .............................................................. within 20 min
Reselect if it is just started. Hold "Stop" down to stop operation, select
the correct functions, menu ＊, raisin and crust color and restart.
＊
Do not change it into Rice flour bread. (The initial working procedure is different)
Press and hold "Stop" button to stop the unit. Reinstall the correct blade and
restart the unit.
(The blade may stop rotating if it is not the correct one.)
Plug in again within 10 min after unplugging and the operation will be resumed.
＊
Do not press "Start".
Press "Start" to recover within 10 min.
＊ Only valid for once. Do not press other buttons.
Adding time