Change Nozzle - XYZ Printing da Vinci 1.0 Pro 3in1 User Manual

da Vinci 1.0 Pro 3in1
2 Select the built-in sample to be printed
BUILD SAMPLE
DEMO
LION
LIGHTHOUSE
Select "YES" and press "OK"
KEY CHAIN
START BUILDING?
NO
YES
After completion of print, take off the print product. The print bed patch is reusable. Replace the patch when it
is worn out.
Note: Stick the bed tape onto the print bed before printing or apply some glue stick on the bed
tape for objects with special structures to make the tape more adhesive and the object
more difficult to come loose.

CHANGE NOZZLE

UTILTIES
BUILD SAMPLE
> CHANGE NOZZLE
CLEAN NOZZLE
Turn off the printer after the printing device and print bed automatically move to their
positions and change the printing module.
Levelness of the Print Bed may be susceptible to vibration during
transportation, which may influence print quality. Please adjust the bed with
reference to 「 Print Bed Adjustment 」 before printing.(P.16)
P 9
CHANGE NOZZLE
ARE YOU SURE?
NO
YES
TURN OFF POWER
AND THEN CHANGE
NOZZLE MODULE
V.1.1