3.
4.
Note: Honeywell recommends using non-perforated labels when using rewinder mode.
Loading with the Cutter
Follow the steps 1-9 for tear off printing, then:
1.
2.
18
Turn the printhead lift lever clockwise to close the printhead, lower the front
arm and click into place, and lift the rewinder batch plate into place.
Go to Main Menu > Setting > Printing > Media > Printing Mode, select
Rewind from the list.
Load media onto supply hub
Ensure the media lever is in the upright position and the screw is tightened.
PD45S User Guide