5
Click Add.
6
Click Browse under "Backup Source Folder Name".
7
Select the shared folder that will be the backup source, then click OK.
8
Click Browse under "Backup Target Folder Name".
9
Select the backup target and click OK.
Note: If you will use the same folder for both Amazon S3 remote replication and as a backup target folder, create a
new subfolder under "\wbfs\amazons3". Under "LAN Protocol Support", enable "Backup". Without these settings, that
shared folder will not be listed in the backup target folder list.
10
Click OK.
Tasks added to "Backup List" are displayed.
11
Click Close.
72