Buffalo terastation 3000 User Manual page 13

port 2, configure the IP address at Network - IP Address in Settings.
4
Follow the steps on the screen to install NAS Navigator2.
5
Click Finish. NAS Navigator2 will open.
6
Right-click on your TeraStation's icon and choose Properties.
Note: For Mac OS, select the TeraStation's icon while holding down the control key, then click Configure.
7
Click the IP Address tab, enter the desired settings, and click OK.
If you are prompted to enter the administrator password for the TeraStation, it is "password" by default.
8
Right-click on your TeraStation's icon and choose Settings.
13