Table of Contents
Advertisement
2
Choose the shared folder that will be accessible to the NFS client.
3
Click Edit.
4
Under "LAN Protocol Support", enable "NFS". Click OK.
Note the NFS path. It will be used later for accessing data from NFS clients.
5
Click Close.
6
Move the NFS switch to the
7
Click the
icon to the right of "NFS"
8
Click Client Settings.
9
Click Add Client.
Note: To delete a client, check the hostname and click Delete Client.
10
Enter the IP address and hostname of the NFS client, then click OK.
Repeat steps 9 and 10 for each client that will be able to access the NFS share.
position to enable NFS.
147
Advertisement
Table of Contents
