Table of Contents
Advertisement
Changing from JBOD to RAID 1
Hard drives that aren't in a RAID array show "Normal (RMM available)". You must have at least two drives available in
JBOD (not in a RAID array) to build the RAID 1 array with RMM.
1
Select the drive on which you do not want to erase data.
2
Check "Add a disk to RAID array with RMM. Your data will be preserved. " .
3
Select the drive to add to the RAID array.
4
Click Create RAID Array. The "Confirm Operation" screen will open.
5
Enter the confirmation number, then click OK.
Adding a drive to an existing RAID array
You can add a drive to a RAID 1 or RAID 5 array. Drives that can be added to the RAID array show "Normal (RMM
available)" or "JBOD. "
Notes:
• Each drive must have the same capacity.
• RMM can be used to expand an array by one drive per operation. To expand by two or more drives, RMM must be
performed multiple times.
1
Click Drives.
2
Click RAID.
3
Choose a RAID array.
38
Advertisement
Table of Contents
