Table of Contents
Advertisement
Notes:
• Enabling LVM before using a drive as an iSCSI drive is optional. If LVM is not enabled, you can still create one iSCSI
volume from the entire drive. However, enabling LVM is recommended for drives that will be used for iSCSI.
• If the LVM settings are changed, all data on the volume will be erased. Before changing the settings, back up any
important data.
5
The "Confirm Operation" screen will open. Enter the displayed number, then click OK.
6
Click OK.
7
Move the iSCSI switch to the
8
Click
to the right of "iSCSI".
9
Click Create Volume.
10
Enter a volume name, volume description, volume, and size, then click OK.
11
Click Close.
12
Connect the new volume. The process will depend on which connection software you're using.
Procedure using Buffalo's iSCSI Connection Tool
(1) Install the iSCSI Connection Tool on your computer from the CD supplied with the TeraStation, or download it
from www.buffalotech.com.
(2) Click Start - All Programs - BUFFALO - iSCSI Connection Tool - iSCSI Connection Tool. For Windows 8 and Windows
Server 2012, click Start - iSCSI Connection Tool.
(3) Click Register iSCSI Device, select the volume to connect, and click Connect.
position to enable iSCSI.
51
Advertisement
Table of Contents
