Adjusting Mouse Options - Fujitsu control 4 0812 User Manual

4. Video Viewer
Table 4.5: Manual Video Adjust Window Areas
Area Description
1 Image capture width 9
Pixel sampling fine
2
adjust
Image capture
3
horizontal position
Image capture
4
vertical position
5 Contrast
6 Brightness
7 Noise threshold
8 Priority threshold
4.8

Adjusting mouse options

The Video Viewer mouse options affect cursor type, scaling, alignment, and
resetting. Mouse settings are device-specific; that is, they can be set differently for
each target device.
Cursor type
The Video Viewer offers five display choices for the local mouse cursor. You can
also select no cursor or the default cursor.
To change the mouse cursor setting:
1. Select Tools-Session Options from the Video Viewer menu. The Session
Options window opens.
2. Click the Mouse tab.
3. Select a mouse cursor type in the Local Cursor area.
4. Click OK.
Scaling
You can select any of three preconfigured mouse scaling options or set custom
scaling. The preconfigured settings are: Default (1:1), High (2:1) or Low (1:2), as
follows:
56
Area Description
Automatic video adjustment
10 Refresh image
11 Adjustment bar
12 Video test pattern
13 Performance monitor
14 Close button
590-1059-640A