Fujitsu control 4 0812 User Manual page 70

4. Video Viewer
Displaying virtual media drive details
To display virtual media drive details:
1. In the Virtual Media window, click Details. The window expands to display
the Details table. Each row indicates:
• Target Drive - Name used for the mapped drive, such as Virtual DVD 1
or Virtual DVD 2.
• Mapped to - Identical to Drive information that is listed in the Client View
Drive column.
• Read Bytes and Write Bytes - Amount of data transferred since the
mapping.
• Duration - Elapsed time since the drive was mapped.
2. To close the Details view, click Details again.
Resetting USB media devices
To reset all USB media devices on the target device, complete the following
steps:
CAUTION: The USB reset feature resets every USB device on the target device, including the mouse and
keyboard. It should only be used when the target device is not responding.
1. In the Virtual Media window, click Details.
2. The Details View is visible. Click USB Reset.
3. A warning message indicates the possible effects of the reset. Click Yes to
confirm the reset or No to cancel the reset.
4. To close the Details view, click Details again.
Closing a virtual media session
To close the Virtual Media window, complete the following steps:
1. Click Exit or X to close the window.
2. If you have any mapped drives, a message indicates that the drives will be
unmapped. Click Yes to confirm and close the window or click No to cancel
the close.
If you attempt to disconnect an active KVM session that has an associated locked
virtual media session, a confirmation message indicates that any virtual media
mappings will be lost.
64
590-1059-640A