Adjusting The Video Viewer Toolbar - Fujitsu control 4 0812 User Manual

4. Video Viewer
2. Click the General tab.
3. Select the Keyboard Pass-through check box to enable Keyboard Pass-
through, or clear the check box to disable Keyboard Pass-through. The
Keyboard Pass-through check box is not selected by default. When
Keyboard Pass-through is selected, all keystrokes except for Control-Alt-
Delete are sent directly to the target device instead of the client computer.
4. Select a keystroke to use to activate the Video Viewer toolbar from the list in
the Menu Activation Keystroke area.
5. If you want the Video Viewer to receive a constant stream of video data from
the target device, select the Background Refresh check box. If you want the
Video Viewer to receive data only when a change has occurred on the target
device, clear the Background Refresh check box.
4.10

Adjusting the Video Viewer toolbar

You can add up to ten buttons to the toolbar. Use these buttons to provide easy
access to defined function and keyboard macros. By default, the Align Local
Cursor, Refresh Image, and Single Cursor Mode buttons are visible on the
toolbar.
To add buttons to the toolbar:
1. Select Tools-Session Options from the Video Viewer toolbar. The Session
Options window opens.
2. Click the Toolbar tab.
3. Select the items you want to add to the Video Viewer toolbar.
4. Complete one of the following steps:
• Click OK to accept the changes and return to the Video Viewer main
window.
• Click X or Cancel to return to Video Viewer main window without making
changes.
Setting the Toolbar Hide Delay time
The toolbar disappears when you remove the mouse cursor unless the
Thumbtack button has been clicked. You can change the interval between the
removal of the mouse cursor and the disappearance of the toolbar by adjusting
the Toolbar Hide Delay time.
58
590-1059-640A