Adjusting The View - Fujitsu control 4 0812 User Manual

be toggled from checked (enabled) to unchecked (disabled) each time it is
selected).
• Right-click on a target device thumbnail and select Disable from the pop-up
menu. Updating of that thumbnail image stops until it is enabled again.
To enable a target device thumbnail in the scan sequence:
• Select a target device thumbnail. Select Thumbnail-<target device name>-
Enable from the Thumbnail Viewer menu. (The Enable menu item state can
be toggled from checked (enabled) to unchecked (disabled) each time it is
selected).
• Right-click on a target device thumbnail and select Enable from the pop-up
menu. Updating of that thumbnail image resumes.
If a target device is currently being accessed by a user, the Enable Scan menu is
disabled for that target device thumbnail.
Using the Thumbnail Viewer
To open a session to a target device from the Thumbnail Viewer:
• Select a target device thumbnail. Select Thumbnail-<target device name>-
View Interactive Session from the Thumbnail Viewer menu.
• Right-click on a target device thumbnail and select View Interactive Session
from the Thumbnail Viewer menu.
• Double-click on a target device thumbnail.
That target device desktop opens in a Video Viewer window.
To set target device credentials from the Thumbnail Viewer:
1. Complete one of the following steps:
• Select a target device thumbnail. Select Thumbnail-<target device
name>-Credentials from the Thumbnail Viewer menu.
• Right-click on a target device thumbnail and select Credentials from the
pop-up menu. The Login window opens.
• Double-click the thumbnail window.
2. Enter a user name and password for the target device.
4.7

Adjusting the view

Using menus or buttons in the Video Viewer window, you can:
• Align the mouse cursors.
590-1059-640A
4.7 Adjusting the view
53