Installing The Software - Fujitsu control 4 0812 User Manual

on your PC. If Java is not installed, download it from http://www.java.com, then
associate the JNLP file with Java WebStart.
2.2

Installing the software

During installation, you are prompted to select the destination location for the
KVM s4 client software. You can select an existing path or type a directory path.
The default path for Windows operating systems is C:\Program Files. The default
path for Linux operating systems is /usr/lib.
If you enter a path name that does not exist, the installation program
automatically creates it during installation.
You can also indicate if you want a KVM s4 client software icon installed on the
desktop.
To install the software on Microsoft Windows operating systems, complete
the following steps:
1. Make sure you have the most recent version of the software by comparing
the version at http://www.ts.fujitsu.com/support/ to the version on the software
CD.
2. If a more recent version is available, download the newest software and
complete the following steps.
a. Navigate to the directory where you downloaded the software.
b. Double-click the setup.exe program name or icon and go to step See
"Follow the on-screen instructions." on page 9.
3. If you are installing the software from the CD, insert the software CD into the
CD drive.
4. Locate the CD drive icon on the desktop, double-click the icon to open the
CD folder, and double-click the setup.exe program file.
-or-
Select Run on the start menu, and enter the following
command to start the install program (replace "drive" with the
letter of the CD drive):
drive:\KVMs4\win32\setup.exe
5. Follow the on-screen instructions.
590-1059-640A
2.2 Installing the software
9