Fujitsu control 4 0812 User Manual page 20

2. Installation and startup
• Mozilla Firefox version 3.0 or later
Launching the On-Board Web Interface
To launch the web interface:
1. Open a web browser and type the IP address of the switch using the local
web interface.
NOTE: If you changed the default HTTP/HTTPS ports in the serial console and are
using an IPv4 address, use IP address format: https://<ipaddress>:<port#>, where
"port#" is the number you specified in the serial console. If you are using an IPv6
address, use format: https://[<ipaddress>]:<port#>, where "port#" is the number you
specified in the serial console. If you are using an IPv6 address, you must enclose the
address in square brackets.
2. The log in window opens. Type your username and password and click OK.
3. The web interface opens and displays the Connections tab.
NOTE: To use the web interface, Java Runtime Environment (JRE) version 1.6.0_11
or higher must be installed on your computer. The switch will attempt to detect Java on
your PC. If Java is not installed, download it from http://www.java.com, then associate
the JNLP file with Java WebStart.
Once you have logged in to the web interface, you will not have to log in again when
launching new sessions unless you have logged out or your session has exceed the
inactivity timeout specified by the administrator.
14
590-1059-640A