Renaming - Fujitsu control 4 0812 User Manual

check box. Select or clear the check box as needed. If you do not delete the
associated target devices, they are still visible in the target devices list but
you cannot connect to them unless they have a URL assigned, in which case
you can connect to the target device using a browser.
4. Complete one of the following steps:
• Click Yes to confirm the deletion. You might receive additional message
prompts, depending on the configuration. Respond as needed. The
units are deleted.
• Click No to cancel the deletion.
To delete a target device Type, Site, Department, or Folder:
1. Select the target device Type, Site, Department, or Folder to delete from the
Group Selector pane.
2. Complete one of the following steps:
• Select Edit-Delete from the Explorer menu.
• Press the Delete key on the keyboard.
3. You are prompted to confirm the number of units that are affected by this
deletion. Complete one of the following steps:
• Click Yes to confirm the deletion. You might receive additional message
prompts, depending on the configuration. Respond as needed. The
element is deleted.
• Click No to cancel the deletion.
3.12

Renaming

The rename function works according to what is currently selected. You might
select and rename a switch or a target device from the Unit list. You can select
and rename unit Types, Sites, Departments, and Folder names in the tree view of
the Group Selector pane.
To rename a unit Type, Site, Department, or Folder:
1. Complete one of the following steps:
• Select a unit from the Unit list.
• In the Group Selector pane, select the unit Type, Site, Department, or
Folder to rename.
2. Complete one of the following steps:
590-1059-640A
3.12 Renaming
37