Using Stealth Mode - Fujitsu control 4 0812 User Manual

4. Video Viewer
4.5

Using stealth mode

Administrators can connect to a target device in stealth mode to view the video
output of a remote user undetected. When in stealth mode, the administrator does
not have keyboard or mouse control over the target device.
To enable stealth KVM sessions on a switch:
1. Click the Appliances button in the Explorer.
2. Complete one of the following steps:
• Double-click on a KVM s4 switch in the Unit list.
• Select a KVM s4 switch from the Unit list, then click the Manage
Appliance button.
• Right-click on a KVM s4 switch in the Unit list. Select Manage Appliance
from the pop-up menu.
• Select a KVM s4 switch in the Unit list and press Enter.
3. Select the Global-Sessions subcategory.
4. Select Stealth Connections in the Connection Sharing area.
To monitor a target device in stealth mode:
1. Click the Devices button in the Explorer.
2. Complete one of the following steps:
• Double-click on the target device in the Unit list.
• Select the target device, then click the Connect Video button.
• Right-click on the target device. Select Connect Video from the pop-up
menu.
• Select the target device and press Enter.
3. If another user is already viewing this target device, a message indicates that
the target device is already involved in a KVM session.
If connection sharing and stealth connections are enabled on the switch
and your access rights (as compared with those of the primary user)
allow it, you are prompted to either share or preempt the existing
session. If the option is available, select Stealth.
4. Complete one of the following steps:
• Click OK or Yes.
50
590-1059-640A