Using Digital Share Mode - Fujitsu control 4 0812 User Manual

4. Video Viewer
5. Select Exclusive Connections in the Connection Sharing area.
Only the primary user of a shared connection or the only user of a non-shared
session can access the Video Viewer in exclusive mode.
To access the Video Viewer in exclusive mode:
1. Open a KVM session to a target device.
2. Select Tools-Exclusive Mode from the Video Viewer toolbar.
3. If the KVM session is currently shared, only the primary user can designate
the session as exclusive. A message warns the primary user that secondary
sessions will be terminated if an exclusive session is invoked.
Complete one of the following steps:
• Select Yes to terminate the sessions of the secondary users.
• Select No to cancel the exclusive mode action.
Secondary users cannot share the exclusive KVM session. However,
administrators or users with certain access rights can still terminate the session.
4.4

Using digital share mode

Multiple users can view and interact with a target device using digital share
mode. When a session is shared, the secondary user can be an active user with
keyboard and mouse control or a passive user that does not have keyboard and
mouse control.
To configure a switch to share KVM sessions:
1. Click the Appliances button in the Explorer.
2. Complete one of the following steps:
• Double-click on a KVM s4 switch in the Unit list.
• Select a KVM s4 switch from the Unit list, then click the Manage
Appliance button.
• Right-click on a KVM s4 switch in the Unit list. Select Manage Appliance
from the pop-up menu.
• Select a KVM s4 switch in the Unit list and press Enter.
3. Select the Global-Sessions subcategory.
4. Select Enable Share Mode in the Connection Sharing area.
48
590-1059-640A