Customizing Options - Fujitsu control 4 0812 User Manual

— or —
Click the Properties task button.
— or —
Right-click on the unit. Select Properties from the pop-up menu.
The Properties dialog box appears.
3. Click the RDP tab.
4. For servers only, in the IP Address field, enter an IP address in dot notation
or enter a 1-128 character domain name. You may use either an IPv4 or IPv6
IP address. Duplicate addresses are allowed. Spaces are not allowed.
5. In the Port field, enter a port number in the range 23-65535. If blank, port 23
is used.
6. Enable or disable the Use Default check box. When enabled, the default
global setting specified in Options will be used and all other portions of the
RDP Application to Launch area are disabled.
7. Enter the directory path and name or click the Browse button to locate the
path and name.
8. Enter command line arguments in the box below the path and name.
— or —
To insert a predefined macro at the cursor location in the command line,
click the Insert Macro list box and select a macro from the drop-down
menu. The Explorer will automatically replace these variables when the
application runs.
9. Enable or disable the Launch in command window check box. When
enabled, the user-specified RDP application will be launched from within an
OS command window.
10. Complete one of the following steps:
• Click another tab to change additional properties.
• If finished, click OK to save the new settings.
• Click Cancel to exit without saving the new settings.
3.8

Customizing options

Set general options for the Explorer in the Options window. General options
include custom field names, selected view on startup, browser application, and
590-1059-640A
3.8 Customizing options
29