Displaying The Topology Table Using Edm - Avaya 3500 series Configuration Manual

Network monitoring configuration using Enterprise Device Manager
4. In the Status section, configure as required.
5. On the toolbar, click Apply.
Variable definitions
The following table describes the variables associated with displaying network topology
information.
Name
IpAddr
Status
NmmLstChg
NmmMaxNum
NmmCurNum

Displaying the topology table using EDM

Use this procedure to display the topology table.
Procedure
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics work area, click the Topology tab.
4. In the Topology section, click the Topology Table tab.
50 Configuration — System Monitoring
Description
Indicates the IP address of the device.
Specifies whether Avaya topology is on
(topOn) or off (topOff) for the device.
DEFAULT: topOn
Indicates the value of sysUpTime the last
time an entry in the network management
MIB (NMM) topology table was added,
deleted, or modified. If the table has not
changed since the last cold or warm start of
the agent.
Indicates the maximum number of entries in
the NMM topology table.
Indicates the current number of entries in the
NMM topology table.
Comments? infodev@avaya.com
March 2013