Avaya 3500 series Configuration Manual page 53

Procedure
1. In the navigation tree, double-click Edit.
2. In the Diagnostics tree, double-click Port Mirrors.
3. On the toolbar, click Insert.
4. In the instance box, type 1.
5. In the PortMode section, click one of the option buttons.
6. Beside the MonitorPort box, click the elipsis(...).
7. Click a port.
8. Click Ok.
9. Beside the dimmed PortListX box, click the elipsis(...).
10. Click a port.
11. Click Ok.
12. Click Insert.
Port Mirrors tab field descriptions
The following table describes the fields on the Port Mirrors tab.
Name
Instance
PortMode
MonitorPort
Configuration — System Monitoring
The insert Port Mirrors dialog box appears.
The Port Editor: Monitor Port list appears.
The Port Editor: portlistX list appears.
Description
Specifies the Port Mirroring instance
number.
Release 5.0 supports only 1 instance.
Specifies the supported Port Mirroring
modes. The modes are:
• Xrx— monitors all traffic received on port
X.
• XrxOrXtx— monitors all traffic received or
transmitted on port X.
• Xtx — monitors all traffic transmitted on
port X.
Specifies the switch port to designate as the
monitor port.
Port Mirroring using EDM
March 2013 53