Table of Contents
Advertisement
Table Top Installation
Figure 14: Table Top Installation
To install the SR1000 for operation on a table top, follow this procedure. Refer to
Table Top Installation
1. Place the Secure Router on the table surface.
2. Attach the cable retainer to the appropriately rated DC power cord behind the
3. Insert the DC power cable jack into the 12 VDC port on the back of the Secure
4. Engage and secure the captive screw on the cable retainer in the threaded hole
5. Connect the appropriate ends of the appropriately rated AC power cord to the power
Note:
Ensure that cables are routed out of the way of foot traffic.
Avaya Secure Router 1000 Series Quick Start Guide
on page 29.
molded strain relief on the cable.
Router.
adjacent to the DC input jack on the Secure Router.
supply and a 110/120 VAC outlet.
Installing the SR1000
Figure 14:
June 2012
29
Advertisement
Table of Contents
