Clearing Statistical Information Using Acli - Avaya 3500 series Configuration Manual

Network monitoring configuration using ACLI
Dropped on No Resources: 0
3524GT-PWR+#
Variable definitions
The following table describes the parameters for the show port-statistics command.
port<portlist>

Clearing Statistical Information using ACLI

Clear all statistical information for the specified port and set all counters to zero (0).
Procedure
1. Log on to ACLI in Interface Configuration command mode.
2. At the command prompt, enter the following command:
Variable definitions
The following table describes the parameters for the clear-stats command.
port<portlist>
38 Configuration — System Monitoring
Variable
clear-stats [port <portlist>]
Variable
Comments? infodev@avaya.com
Value
Specifies the port numbers for which to
display statistics.
Important:
If you omit this parameter, the system
uses the port number you specified when
selecting the interface.
Value
Specifies the port number for which to
display statistics
Important:
If you omit this parameter, the system
uses the port number you specified when
selecting the interface.
March 2013