Ice Chute Assembly - Viking VCFF136D Service Manual

Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Dispenser and User Interface (continued)
5. From inside of eschutcheon, depress tabs to
release dispenser board.
Tab
Dispenser Board
Eschutcheon
6. Repair or replace dispenser board.
7. Reverse procedure to reinstall.
© 2010 Viking Preferred Service
WARNING

Ice Chute Assembly

1. Remove dispenser, (see steps 1-4 dispenser
section, page 56).
2. Remove tube ring from ice chute assembly.
3. Disengage dispenser tube from ice chute
assembly, remove grounding screw and
securing screws.
Screw
Ground Screw
Ice Chute Assembly
Tube Ring
Dispenser Tube
68