Refrigerator Light Switch; Ice Bin Assembly (With Auger) - Viking VCFF136D Service Manual

Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.

Refrigerator Light Switch

To access the refrigerator light switches. Locate the
right or the left light switch:
1. Open door.
2. Use a flat blade to depress light switch securing
tabs.
Right Light Switch
3. Pull switch into refrigerator compartment and
disconnect wiring harness.
Door Switch Harness
4. Repair or replace switch.
5. Reverse procedure to reinstall.
© 2010 Viking Preferred Service
WARNING
Screwdriver
Blade

Ice Bin Assembly (with Auger)

1. Open doors and depress button on side of ice
bin assembly .
Ice Bin Assembly
(Including Auger)
2. Slide ice bin assembly forward to remove.
3. Repair or replace ice bin/auger assembly.
Note: Ice bin assembly individual parts are not
serviceable. If assembly is damaged entire unit
must be replaced.
48