Main Control Board - Viking VCFF136D Service Manual

Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.

Main Control Board

To access main control board:
1. Remove securing screws and outer control
board cover.
2. Lift off the clear control board cover.
Clear Cover
© 2010 Viking Preferred Service
WARNING
3. Disconnect wiring. Press tabs to release main
Screw
4. Repair or replace main control board.
5. Reverse procedure to reinstall.
control board.
Tabs
71