Operation; Using The Controls; Temperature Controls; Operation Using The Controls - Viking VCFF136D Service Manual

Operation

Using the Controls

Touch pads
ice and water dispenser.
the four touch pads located on either side of
the display. Then, touch the pad next to the
desired option or user setting to access the
various features.
Note: Press only the touch pads next to your
selection on the display screen, not the selection
itself.
IMPORTANT: Wait 24 hours for your refrigerator
to cool completely before adding food. If you add
food before the refrigerator has cooled completely,
your food may spoil.
Note: Adjusting the refrigerator and freezer
temperature controls to a colder than
recommended setting will not cool the
compartments any faster.
for normal household refrigerator use. The
controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
the refrigerator or freezer, first check the air
vents to be sure they are not blocked before
adjusting the controls.
© 2010 Viking Preferred Service

Temperature Controls

For your convenience, your temperature controls
are preset at the factory. When you first install your
refrigerator, make sure the controls are still set to
the recommended set points.
TEMP" on the main menu to display the current
set point of the compartment. Press the touch
pad next to "WARMER" or "COLDER" to adjust
the set point to the recommended 38°F. Press
the touch pad next to "DONE" to lock in the
setting.
on the main menu to display the current set
point of the compartment. Press the touch pad
next to "WARMER" or "COLDER" to adjust
the set point to the recommended 0°F. Press
the touch pad next to "DONE" to lock in the
setting.
To Turn Cooling Off/On:
Cooling Off controls all cooling functions, the
control panel and the dispenser. It does not
disconnect power to the refrigerator.
pad for three seconds. The LED will light
up to indicate that cooling is OFF. Neither
compartment will cool.
turn "ON" the cooling. The LED will turn off.
9