Checking The Currently Playing Program Source, Etc; Switching The Surround Speakers; Switching Between Hdmi And Dvi Monitor Output - Denon AVC-A1XVA Operating Instructions Manual

[5] Checking the currently playing program source, etc.

q On screen display
1
Each time an operation is performed,
a description of that operation
appears on the display connected to
AVC-A1XVA's VIDEO MONITOR OUT
jack. Also, the unit's operating status
can be checked during playback by
pressing the Remote control unit's
ON SCREEN button.
Such information as the position of the input selector and
the surround parameter settings is output in sequence.
w Front panel display
Descriptions of the unit's operations
are also displayed on the front panel
display. In addition, the display can
be switched to check the unit's
operating status while playing a
source by pressing the STATUS
button.
e Using the dimmer function
Use this to change the brightness of
the display.
The display brightness changes in
four steps (bright, medium, dim and
off) by pressing the Main unit's
DIMMER button repeatedly.

[6] Switching the surround speakers

1 The surround speakers switch as shown below each time the
SPEAKER button is pressed.
(Main unit)
SURROUND A
This operation is possible when the setting for using both
surround speakers A and B is made at "2-1. Speaker
Configuration" (See pages 49, 50).

[7] Switching between HDMI and DVI monitor output

1 The monitor out terminal switch as shown below each time
the MONITOR SELECT button is pressed.
This operation is possible when the HDMI or DVI input
terminal is assigned to be input source at "4-1. HDMI / DVI
In Assignment" (See pages 69, 70).
134
(Remote control unit)
(Main unit)
(Main unit)
(Remote control unit)
SURROUND B
SURROUND A+B
HDMI DVI
(Main unit)
1- e
1- q
1
1
1
1- w