Option Setup; Setting The Channel Setup; Channel Setup Flow - Denon AVC-A1XVA Operating Instructions Manual

7
Setting the Option Setup
• Make other expert settings.
1
(Main unit)
2
(Main unit)

7-1. Setting the Channel setup

• With this setting it is possible to change the number of channels played in the different zones according to the purpose.
The AVC-A1XVA is equipped with pre-out connectors for a total of 22 channels.
16 channel of these pre-out connectors can be assigned between the MAIN ZONE and ZONE2 (Theater). In addition, up to three channels of
subwoofers can be added to the MAIN ZONE, so subwoofers can be set in the front and back or at the sides. The number of channels output
from the pre-out connectors exclusively for ZONE2, 3 and 4 can be set to "MONO" or "STEREO" according to the method of playback in the
various multi-zones.

2 Channel setup flow

96
Select "Option Setup" at the System Setup Menu.
(Remote control unit)
Display the Option Setup menu screen.
(Remote control unit)
Set the number of channels for the MAIN ZONE's main channel.
Set the number of subwoofer channels for the MAIN ZONE.
The number of channels that can be set for ZONE2 depends of the
number of channels in the MAIN ZONE. See the table on page 98.
Set the number of channels for the ZONE2.
Set the number of channels for the ZONE3.
Set the number of channels for the ZONE4.
* S y s t e m S e t u p
O p t i o n S e t u p
* O p t i o n S e t u p
C h a n n e l S e t u p