Connecting Video Components - Denon AVC-A1XVA Operating Instructions Manual

Connecting Video Components

• To connect the video signal, connect using a 75 Ω/ohms video signal cord. Using an improper cable can result in a drop in picture quality.
• When making connections, also refer to the operating instructions of the other components.
• The AVC-A1XVA is equipped with a function for up and down converting video signals. (See page 17)
The signal connected to the video signal terminal is output to the S-Video and component video monitor out terminals.
But the REC OUT terminals have no conversion function, so when recording connect the appropriate video terminals.
DVD player or video disc player (VDP), etc.
AUDIO
VIDEO
OUT
R L OUT
R L
AUDIO
VIDEO
OUT
R L OUT
R L
DBS tuner
B
AUDIO
OUT
R
R
Note on connecting the digital
input jacks
• Only audio signals are input to
the digital input jacks. For details,
see page 11.
NOTE:
• Connecting a LD (laser disc) player with a Dolby
Digital RF Output.
The AVC-A1XVA does not have a DD RF demodulator
function. Therefore, you need to use a commercially
available outboard DD RF demodulator and connect its
digital output to one of the AVC-A1XVA available digital
inputs. Refer to the demodulator's owner's manual for
further information.
12
C onnecting a DVD player or a video disc player (VDP)
DVD
• Connect the video disc player's video output jack (VIDEO OUTPUT) to the
75 Ω/ohms video coaxial pin plug cord.
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO OUTPUT) to the
jacks using pin plug cords.
• VDP can be connected to the VDP jacks in the same way.
TV
Connecting a TV tuner
TV
• Connect the TV's tuner's video output jack (VIDEO OUTPUT) to the
(yellow) TV IN jack using a 75 Ω/ohms video coaxial pin plug
VIDEO
cord.
• Connect the TV's tuner's audio output jacks (AUDIO OUTPUT) to the
AUDIO TV IN jacks using pin plug cords.
Connecting a DBS tuner
DBS
• Connect the DBS tuner's video output jack (VIDEO OUTPUT) to the
(yellow) DBS IN jack using a 75 Ω/ohms video coaxial pin
VIDEO
VIDEO
plug cord.
L OUT
• Connect the DBS tuner's audio output jacks (AUDIO OUTPUT) to the
AUDIO DBS IN jacks using pin plug cords.
L
L
R
L R L R R L R L R L R L
R R
L L
R L R L OUT IN
OUT IN
VIDEO
AUDIO
Connecting the video recorders
• There are four sets of video deck (VCR) jacks, so four video decks can be connected for
simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
and the video deck's video input jack (VIDEO IN) to the
75 Ω/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the
video deck's audio input jacks (AUDIO IN) to the
Connect other video decks to the VCR-2, VCR-3 or VCR-4 jacks in the same way.
(yellow) DVD IN jack using a
VIDEO
Monitor
VIDEO
IN
Connecting a monitor
MONITOR OUT
• Connect the TV's video input
jack (VIDEO INPUT) to the
MONITOR OUT jack
VIDEO
using a 75 Ω/ohms video
coaxial pin plug cord.
R L
R L
OUT
AUDIO
Video deck 1 Video deck 2
VIDEO (yellow) VCR-1 IN jack,
VIDEO (yellow) VCR-1 OUT jack using
VCR-1 IN jacks, and the
AUDIO
VCR-1 OUT jacks using pin plug cords.
AUDIO
DVD IN
AUDIO
R L
R L OUT IN
IN
VIDEO