Adjusting The Tone From The Main Unit - Denon AVC-A1XVA Operating Instructions Manual

5
(Remote control unit)
6
(Remote control unit)
7
or
(Remote control unit)

[2] Adjusting the tone from the Main unit

1
(Main unit)
2
(Main unit)
3
(Main unit)
154
q Select Bass or Treble.
Enter the setting.
The Surround Parameter menu screen re-appears.
Press the ENTER or SURROUND PARAMETER button to complete the setting.
The tone switches as follows each time the TONE CONTROL button is pressed.
BASS (ALL) TREBLE (ALL)
S B-TREBLE (surround B)
SB-BASS (surround back)
Select with the name of the volume to be adjusted and adjust the level.
• To increase the bass or treble:
The bass or treble sound can be increased to up to +6 dB in steps of 1 dB.
• To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB in steps of 1 dB.
If you do not want the bass and treble to be adjusted, turn on the tone defeat mode.
The signals do not pass through the bass and treble adjustment circuits, providing higher quality sound.
(Remote control unit)
2 1 3
2
F-BASS (front) F-TREBLE (front)
S B-BASS (surround B) SA-TREBLE (surround A)
SB-TREBLE (surround back) SW-BASS (subwoofer)
w Set the level.
C-BASS (center) C-TREBLE (center)
SA-BASS (surround A)