Dip Switch Setting For Star(Sp500) Mode - Samsung SRP-275 Operator's Manual

CHAPTER 3
Switch settings
DIP Switch 2 (RS232C serial interface model)
Switch Function
2-1 Word length
2-2 Parity check
2-3 Parity selection
2-4 Handshaking
2-5
Baud rate selection(*3)
2-6
2-7 Near end Switch
2-8 Mechanism type
(*1) Emulation Selection (DSW 1-1and 1-2)
Emulation 1-1
EPSON OFF OFF
STAR OFF
CITIZEN ON OFF
EPSON-KP ON
EPSON-KP(EPSON Kitchen printer Mode) : A alarm is generated by printer after auto cutting and in paper end error.
(*2) International character selection
No.
DSW1-5
Country
U.S.A. ON
France OFF
Germany ON
U.K. OFF
Denmark ON
Sweden OFF
Italy ON
Windows code OFF
(*3) Baud rate selection (Transmission speed)
Transmission 2-5
2400 baud ON
4800 baud OFF
9600 baud OFF OFF
19200 baud ON OFF
3-4
ON OFF Default
8 bits 7 bits ON
Disable Enable ON
ODD EVEN ON
DTR/DSR XON/XOFF ON
OFF
Refer to the following table
OFF
Enable Disable OFF
Graphic Character OFF
1-2
ON
ON
DSW1-6 DSW1-7 Code page
ON ON PC 437
ON ON
OFF ON PC 850
OFF ON
ON OFF
PC 865
ON OFF
OFF OFF PC 850
OFF OFF Windows code
2-6
ON
ON

3.1.3 DIP Switch setting for Star(SP500) mode

DIP Switch 1
Switch Function
1-1
Emulation selection(*1)
1-2
1-3 Auto cutter
1-4 Black/Red printing
1-5
1-6
Reserved
1-7
1-8
DIP Switch 2 (RS232C serial interface model)
Switch Function
Reserved
2-1
2-2 Reserved
2-3 Hand shaking XON/XOFF
2-4 Word length
2-5 Parity check
2-6 Parity selection
2-7
Baud rate selection(*2)
2-8
(*2) Baud rate selection (Transmission speed)
Transmission 2-7 2-8
2400 baud ON ON
4800 baud OFF ON
9600 baud OFF OFF
19200 baud ON OFF
Change in DIP Switch settings are recognized only when the printer power is turned on or
when the printer is reset by using the interface. If the DIP Switch setting is changed after
the printer power is turned on, the change does not take effect until the printer is turned on
again or is reset.
ON OFF Default
OFF
Refer to the following table
OFF
Enable Disable OFF
Enable Disable OFF
OFF
ON OFF Default
OFF
OFF
DTR/DSR OFF
7 bits 8 bits OFF
Enable Disable OFF
EVEN ODD OFF
OFF
Refer to the following table
OFF
3-5 3-5