Samsung SRP-275 Operator's Manual page 42

CHAPTER 5
CONTROL COMMANDS LIST
DLE DC4 (fn = 1)
[Name] Generate pulse at real-time
[Format] ASCII DLE
Hex 10
Decimal 16
[Range] n = 1
m = 0, 1
1 ≤ t ≤ 8
[Description] Outputs the pulse specified by t to connector pin m as follows in real time:
m
0 Drawer kick-out connector pin 2
1 Drawer kick-out connector pin 5
The pulse ON time is [ t x100 ms] and the OFF time is [ t x100 ms]
[Notes] This is a real-time command that the printer executes upon receiving it.
Note the following when using this command.
-If this command is embedded within the code string of another command,
it is processed as a parameter of the other command, and the print result is
not correct.
-If another command (such as bit image or defined data) has a code string in
a parameter that is the same as this command, the printer starts processing
this command.
This command is ignored in the following states:
-In error status
-When the pulse is being output to the connector pin
(during processing of ESC p and DLE DC4)
-During transmission of block data (Header ~ NUL)
-When this command is disabled by GS (D)
5-12
DC4 n m
14 n m
20 n m
Connector pin
ESC SP
[Name]
t [Format]
t
t
[Range]
[Default]
[Description]
[Notes]
ESC !
[Name]
[Format]
[Range]
[Default]
[Description]
Bit Off/On
Off
0
On
1,2
Off
3
On
Off
4
On
Off
5
On
6 Off
Off
7
On
Set right-side character spacing
ASCII ESC SP
Hex 1B 20
Decimal 27 32
0 ≤ n ≤ 255
n = 0
Sets the right-side character spacing to n x (horizontal or vertical motion unit).
- When characters are enlarged, the character spacing is n times normal value.
The character spacing for double-width mode is twice the normal value.
Select print mode(s)
ASCII ESC !
Hex 1B 21
Decimal 27 33
0 ≤ n ≤ 255
n = 1
Selects or cancels print modes collectively (emphasized, double-height,
double-width, underline) using n as follows:
Hex Decimal
00 Character font A(9x9)selected
01 Character font B(7x9) selected
- - - Undefined
00 0 Emphasized mode not selected
08 8 Emphasized mode selected
00 0 Double-height mode not selected
10 16 Double-height mode selected
00 0 Double-width mode not selected
20 32 Double-width mode selected
- - Undefined
00 0 Underline mode not selected
80 128 Underline mode selected
n
n
n
n
n
n
Status
5-13