Samsung SRP-275 Operator's Manual page 75

CHAPTER 5
CONTROL COMMANDS LIST
ESC M
[Name] Specify 7 x 9 font (half dots) (default)
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] ------
[Default] ------
[Description] Specifies 7 x 9 (half dots) fonts
ESC P
[Name] Specify 9 x 9 font (half dots)
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] ------
[Default] ------
[Description] Specifies 9 x 9 font (half dots) dot fonts.
ESC :
[Name] Specify 5 x 9 font (3P-1)
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] ------
[Default] ------
[Description] Specifies 5 x 9 (3 pulse = 1) dot fonts.
This command is recommended not to use because print quality is not
guaranteed.
5-78
M
4D
77
P
50
80
:
3A
58
ESC SP n
[Name] Specify character space
[Format] ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 15
[Range]
[Default] n = 1
[Description] Sets character right space in n half-dots.
When in double-wide printing, the right space is also double.
SO
[Name] Specify character space
[Format] ASCII SO
Hex 0E
Decimal 14
[Range] ------
[Default] Cancel double-wide expanded characters
[Description] Prints ANK characters and Chinese characters with characters expanded
twice the normal width.
This command is equivalent to ESC W n (n = 1).
This command is recommended not to apply to 5_9 (3 pulse = 1) dot fonts
because print quality is not guaranteed.
DC4
[Name] Cancel double wide printing
[Format] ASCII DC4
Hex 14
Decimal 20
[Range] ------
[Default] Cancel double-wide expanded characters
[Description] Cancels expanded wide printing if the following commands specify expanded
wide printing.
- Double wide printing specifying command (SO)
- Set/cancel double wide printing (ESC W)
This command is equivalent to ESC W n (n = 0).
SP n
20 n
32 n
5-79