Samsung SRP-275 Operator's Manual page 105

CHAPTER 5
CONTROL COMMANDS LIST
FS
[Name] Driving command B for drawer-1
[Format] ASCII FS
Hex 1C
[Description] This command drives the drawer connector No. 2 pin under the condition set
with the ESC BEL n1 n2 command.
SUB
[[Name] Driving command for drawer-2
[Format] ASCII SUB
Hex 1A
[Description] As soon as this command is received, the drawer connector No. 5 pin is
driven. The power-on time is 200 ms ON and 200 ms OFF stationary. The
drawers 1 and 2 cannot be driven simultaneously.
RS
[Name] Buzzer-on
[Format] ASCII RS
Hex 1E
[Description] This command emits a short warning sound from the printer.
5-136
ESC P <0>
[Name] Partial cut
[Format] ASCII ESC P
Hex 1B 50
[Description] This command partially cuts the paper
ESC P <1>
[Name] Partial cut
[Format] ASCII ESC P
Hex 1B 50
[Description] This command partially cuts the paper
ESC R n
[Name] Selecting the international character set
[Format] ASCII ESC R n
Hex 1B 52 n
0 ≤ n ≤ 10
[Range]
[Description] Selects a page n from the character code table.
n Character Set
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
5 Sweden
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark II
<0>
00
<1>
01
5-137