Samsung SRP-275 Operator's Manual page 52

CHAPTER 5
CONTROL COMMANDS LIST
ESC r
[Name] Select print color
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] n = 0, 1, 48, 49
[Default] n = 0
[Description] Selects a print color, using n as follows:
n Selected color
0, 48
1, 49
[Notes] This command is enabled only when processed at the beginning of the line.
This command is effective until ESC @ is executed, the printer is reset,
or the power is turned off.
5-32
r n
72 n
114 n
Black
Red
ESC t
[Name] Select paper sensor(s) to output paper-end signals
[Format] ASCII ESC t
Hex 1B 74
Decimal 27 116
[Range] n = 0, 1, 2, 3, 4, 5, 16, 17, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 255
[Default] n = 0
[Description] Selects a page n from the character code table.
n Page
0 PC437
1 Katakana
2 PC850
3 PC860
4 PC863
5 PC865
16 WPC1252
17 PC866
18 PC852
19 PC858
21 PC862
22 PC864
23 Thai character code 42
24 WPC1253
25 WPC1254
26 PC1257
27 Farsi
28 WPC1251(*1)
29 PC737(*1)
30 PC775(*1)
[Notes] The alphanumeric characters (20H (decimal 32) to 7FH (decimal 127)) are
the same for each page.
The executed characters (80H (decimal 128) to FFH (decimal 225)) are
different for each page.
The selected characters code table is effective until ESC @ is executed, the
printer is reset, or the power is turned off.
n = 255; defaulf code page.
(*1) Only Font B available.
n
n
n
5-33