Installing Ribbon Cassette; Installing Or Replacing Paper Roll - Samsung SRP-275 Operator's Manual

CHAPTER 1
Setting up the printer

1.4 Installing ribbon cassette

Malfunctions and other problems may arise if other than specified ribbon cassettes are
used in the printer. The Warranty may be void if other than specified ribbon cassettes are
used. Contact your dealer or place of purchase for more information about proper ribbon
cassettes.
1-4
1) Before inserting the ribbon cassette, turn the
knob clockwise to prevent twisting the ribbon.
2) Open the front cover of printer.
3) Take out the old ribbon cassette if there is one.
4) Insert the new ribbon cassette as shown
and pay particular attention to the placement
of the ribbon behind the Print Head.
5) During inserting the ribbon cassette, turn the
knob clockwise again to make sure the ribbon
moves freely in the cassette.
6) Close front cover of printer.
1.5 Installing paper roll
Notice the caution label and do not touch the auto cutter blade when you open rear cover.
1) To prevent data loss, make sure that the printer
2) Open the rear cover by pushing the open button
3) Remove the used paper roll core if there is one.
4) Insert the paper roll as shown.
5) Be sure to note the correct direction that the
6) Pull out small amount of paper as shown.
is not receiving data.
and push the arrow mark back.
paper should come off the paper roll.
Then close the rear cover and tear off the extra
paper by pulling it toward the front of the printer.
1-5