Samsung SRP-275 Operator's Manual page 107

CHAPTER 5
CONTROL COMMANDS LIST
ESC DC3 n
[Name] Printing the message
[Format] ASCII ESC DC3
Hex 1B 13
1 ≤ n ≤ 10
[Range]
[Function] This command prints a message. If the value of n is specified beyond the
range, the message will not be printed.
ESC y n
[Name] Setting the print lines after paper near end detection
[Format] ASCll ESC y
Hex 1B 79
0 ≤ n ≤ 255
[Range]
[Description] This command sets the number of print lines after paper near end detection.
It stops printing after printing n x 2 lines since detection of the paper near end,
resulting in the paper near end state.
5-140
n
n
n
n
ESC DC2 n1 n2
[Name] Deleting the download character, message, bit image
[Format] ASCII ESC DC2 n1
Hex 1B 12 n1
0 ≤ n1 ≤ 3
[Range]
0 ≤ n2
(Specify 0 at n1 = 0)
(1 ≤ n2 ≤ 10 at n1 = 1)
(32 ≤ n2 ≤ 255 at n1 = 2)
(Specify 0 at n1 = 3)
[Description] This command deletes the downloaded characters, message, and bit image.
n Download Character Set
0
Deselect
30
1
Select
31
With n2, specify which data of the function specified with n1 should be
deleted.
n2 = 0
Deletes all the data saved with the download function specified with n1.
n2 0
Deletes the data downloaded at the value specified with n2
(Value specified when saving with each download command),
of the download function specified with n1.
n2
n2
5-141