Samsung SRP-275 Operator's Manual page 101

CHAPTER 5
CONTROL COMMANDS LIST
DC1
[Name] Setting the select mode
[Format] ASCII DC1
Hex 11
[Description] This command sets the printer in the selecting status.
DC2
[Name] Specifying/Canceling the inverted character
[Format] ASCII DC2
Hex 12
[Description] This command selects/deselects the inverted characters. Enter this command
at the beginning of one line. Otherwise, it is overridden. Erect and inverted
characters cannot be mixed in one line.
DC2
[Name] Specifying the red print
[Format] ASCII DC2
Hex 12
[Description] This command specifies red-color characters. All the characters in one line
are printed in red by prefixing the print data with this command and sending
it to the printer. When you want to use red characters, use this command for
each line.
5-128
(CBM2 Mode) DC3
[Name]
[Format]
[Description]
(CBM1 Mode)
DC3
[Name]
[Format]
[Description]
(CBM2 Mode)
CAN
[Name]
[Format]
[Description]
Specifying the red print
ASCII DC3
Hex 13
This command specifies red-color characters. All the characters in one line are
printed in red by prefixing the print data with this command and sending it to
the printer. When you want to use red characters, use this command for each
line.
Setting the deselect character
ASCII DC3
Hex 13
This command sets the printer in the deselecting status in which the printer
cannot receive data. To set the printer in the selecting status, use DC1.
Canceling the print data
ASCII CAN
Hex 18
This command clears the print data in the lines entered prior to this command.
(CBM1 Mode)
(CBM2 Mode)
5-129