Setting Up The Printer - Samsung SRP-275 Operator's Manual

Introduction
The SRP-275 is a high-quality impact dot matrix POS printer.
This one-station printer has the following features.
Compact design and light-weight.
High-speed printing using logic-seeking.
Easy to use : clamshell mechanism.
High reliability and long life due to the use of stepping motors for head carriage return and paper feeding.
Two color printing (red/black) available.
Various formats are possible because the paper feeding pitch is selectable.
High general control utility based on the ESC/POS (TM) standard.
The head can be driven due to the internal drawer interface.
Character font (7X9, 9X9) is selectable.
The auto cutter uses a circular method with a high-quality blade and a long life
(Approximately 1,000,000 cuts).
Paper near end Switch is standard.
A internal AC adaptor.
Please be sure to read the instructions in this manual carefully before using your new printer.
Front View
1
Rear View
CHAPTER

SETTING UP THE PRINTER

1.1 Unpacking
1.2 Choosing a place for the printer
1.3 Connecting the cables
1.4 Installing ribbon cassette
1.5 Installing or replacing paper roll
1.6 Changing the frame control paper position
1.7 Installing wall mount
1.8 Using the control panel
1.9 Self test
1
1-2
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9