Samsung SRP-275 Operator's Manual page 76

CHAPTER 5
CONTROL COMMANDS LIST
ESC W n
[Name] Specify/cancel expanded double-wide printing
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] n = 0, 1, 48, 49
[Default] n = 0 (Double wide printing cancelled)
[Description] Specifies/cancels double-wide expanded printing for ANK characters and
Chinese characters, according to an n value.
n
0, 48 Cancel double-wide printing
1, 49 Specify double-wide expanded printing
This command is recommended not to apply to 5 x 9 (3 pulse = 1) dot fonts
decause print guality is not guaranteed.
ESC h n
[Name] Specify/cancel expanded double-high printing
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] n = 0, 1, 48, 49
[Default] n = 0 (Double-high printing cancelled)
[Description] Specifies/cancels double-high expanded printing for ANK characters and
Chinese characters, according to an n value.
n
0, 48 Cancel printing expanded character height
1, 49 Specify double-high expanded printing
Double-high & wide expanded character printing is possible by combining the
double-wide and double-high expanded character commands.
The line feed amount including the expanded double-high characters is twice
the normal amount.
This command is recommended not to apply to 5 x 9 (3 pulse = 1) dot fonts because
print quality is not guaranteed.
5-80
W n
57 n
87 n
Function
h n
68 n
104 n
Function
ESC E
[Name] Select emphasized printing
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] ------
[Default] Emphasized printing cancelled
[Description] Specifies emphasized printing for subsequent data.
When in emphasized printing, data is printed in two passes.
ESC F
[Name] Cancel emphasized printing
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] ------
[Default] Emphasized printing cancelled
[Description] Cancels emphasized printing for subsequent data.
E
45
69
F
46
70
5-81