Brother MFC-3100C Owner's Manual page 132

ERROR MESSAGE
INK EMPTY XXXX
LOW TEMPERATURE The print head detects low
MACHINE ERROR XX The machine has a mechanical
NEAR EMPTY XXXX One or more of the ink cartridges are
NO RESPONSE/BUSY The number you dialled does not
NOT ASSIGNED
OUT OF MEMORY
PAPER JAM
121
Chapter 19
CAUSE
One or more of the ink cartridges are
empty. The machine will stop all
print operations (such as printing
copies, faxes and jobs from the PC).
While memory is available, black
and white faxes will be received into
memory. If a sending machine has a
colour fax, the machine's
"handshake" will request that the fax
be sent as black and white; if the
sending machine has the feature to
convert it, the colour fax will be
received into memory as a black and
white fax. MFCs connected with a
USB cable will be able to perform
scan operations; MFCs connected
with a parallel cable, will not scan.
The cleaning process consumes a
small amount of ink.
temperature.
problem.
running out of ink. The machine will
stop receiving colour faxes. The
machine's "handshake" will request
that it be sent in black and white; if
the sending machine has the feature
to convert it, the colour fax will be
received into memory as a black and
white fax.
answer or is busy.
You tried to access a Speed Dial
number that is not programmed.
The data is too large for the
machine's memory.
The recording paper is jammed in the
machine.
ACTION
Replace the ink cartridges. (See
Replacing the Ink Cartridges, page
137)
Use the machine at the warm room
or warm your room.
Unplug the machine, and then call
Brother or your dealer for service.
Order a new ink cartridge now.
Verify the number and try again.
Set up the Speed Dial number.
(See Storing Speed Dial Numbers,
page 18)
(See Out of Memory, page 50)
Remove the jammed paper
depending on where it is jammed
in the machine. (See Printer Jam
or Paper Jam, page 123)