Custom Settings - Brother MFC-3100C Owner's Manual

Custom Settings

Volume Settings
Ring Volume
You can select how loud the machine rings for incoming calls. The ring volume can be turned off
for silent reception if required.
1
Press Menu/Set, 1, 4, 1.
2
Press or to select OFF, LOW, or HIGH.
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
You can adjust the ring volume when the machine is idle. You can turn the ring OFF.
Press or to adjust the volume level. With each key press, the machine rings so you can hear
the current setting and the display shows the setting you are choosing. Each key press changes the
volume to the next setting.
The new setting will remain until you change it again.
Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes set to LOW. When the beeper
is set to LOW or HIGH, the machine beeps every time you press a key or make an error, and at the
end of sending or receiving a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Menu/Set.
4
Press Stop/Exit.
Power Save
Setting Power Save Mode reduces power consumption by turning off the CPU etc. inside the
machine. If Power Save Mode is switched ON, when the machine is idle, it drops into power save
mode automatically. In the Power Save Mode, you cannot use fax detect function or remote
activation.
The machine will not display the date and time in this condition.
1
Press Menu/Set, 1, 5.
2
Press or to select ON (or OFF).
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
16
Setup